AQuly Glass resin
Body Car Coating Kit
- Manufacturer:
- Product id:8150001014
- Available:Нет в наличии0
- Weight:0.50 кг
Brand: Aquly, Kyowa Shoko
LTD, Japan
Article: 150001014
Volume: 30 ml
Non-woven napkin size: 30
X 30 cm
Shipping weight: 1lb
Aquly glass resin body coating is newly introduced to
car coating market for more customer’s satisfaction by everlasting effects to
keep the best shining body condition.
Aquly is a protective
coating using a nanotechnology product (DOW CORNING, the largest Japanese plant
for chemical nanotechnology “TORAY” Co., Ltd) patented and produced by the
Kyowa Shoko plant. Ltd., Osaka, Japan.
The chemical laboratories in
Japan have been working to improve the quality of the product for ten years.
What is AQuly?
- hardness 6H (6.7H by the
3rd year) -controlled hardness does not allow the composition to harden up to
9H, which excludes the formation of microcracks on the surfaces.
-applied to all surfaces
of the body: paintwork, rubber bands, chrome, glass (except for the
windshield), rubber, rims. On all parts of the car exterior!
-The composition is
applied in any closed, well-lit, clean (not dusty) room at a positive
temperature.
- the whole application
takes 45 minutes.
- the application
technology is very simple:
The composition is applied (stretched) using a
non-woven material and polished, the excess composition is removed using two
microfiber napkins.
No additional special
equipment is required.
- For ease of application,
but at the same time to exclude the possibility of errors in application, the
chemical composition is designed in such a way that the 2.5 micron. Aquly layer
is automatically evenly distributed over the surface and reacts with the
surface to be coated. All excess will rise to the surface and go away along
with special oils when polishing with microfiber.
- After application, the
car must not be washed under strong pressure and chemicals for 21 days.
Chemical composition:
Aquly component A
Alkyl silicone resin,
naphtha
Volume 15 ml.
Precautions:
-Do not apply to human
body
-Avoid ingestion.
-May cause skin
irritation. Wear protective gloves.
Chemical composition:
Aquly component B
Dimethylpolysiloxane
Volume 15 ml.
Precautions:
-Do not apply to human
body
-Avoid ingestion.
-May cause skin
irritation. Wear protective gloves
-Avoid open sources of
fire
-Avoid falling into the
hands of children
An allergic reaction on
the hands is possible, in which case the manufacturer recommends applying the
product with gloves.
To maintain the
hydrophobic effect, it is necessary to apply Aquly Conditioner every 6 months,
which renews the surface of the protective composition and gives the surface a
shine and hydrophobic effect.
CAUTION: EYE IRRITANT. In
case of eye contact, flush thoroughly with water for 15 minutes. KEEP OUT OF
REACH OF CHILDREN. Keep from freezing.
Notice
We aim to show you
accurate product information. Product packaging and material may contain more
and/or different information from the website, including the product
description, country of origin, nutrition, ingredient, allergen and other
information. Always read labels, warnings, and directions and other information
provided with the product before using or consuming a product.
For application, you will
need 3 microfiber towels in addition to the kit.
1. Thoroughly wash the
surface of the car with water and a specialized detergent. It is recommended to
use a soft sponge that does not damage the surface.
Note: Polishing for used
cars. Buff the paintwork with a mild solution, remove all dirt and minor
scratches.
2. Then, on the damp surface of the car, apply a degreasing alcohol solution, foam it and carefully remove the grease film from the surface with a soft sponge. Then wash the car well with water and dry the surface with a soft cloth.
3. Pour Akli A solution into a container with Akli B solution and shake the bottle until smooth. The number of Akli in one set is enough to cover one SUV.
4.Spray the resulting solution onto a non-woven fabric (4-5 pressings of the spray bottle on each part of the car to be treated), then spread the solution over the surface. Make sure that the solution is applied evenly, in a thin layer. Application should be done in stages, treating each part separately.
Wait 15-20 minutes, after this time a fat-like substance will appear on the surface to be coated. Remove it carefully. Make sure that the greasy substance is removed from all parts of the treated surface. This procedure is recommended to be carried out using two microfiber towels, one of which should be pre-moistened with water. It is recommended to perform the procedure with both hands, while holding a wet piece of cloth in one and dry in the other. First, rub over the surface with a damp cloth to remove most of the greasy substance, then use a dry cloth to complete the surface cleaning procedure. Do the same with glass, plastic, chrome and wheels.
5. The final stage. At
this stage, it is allowed to touch the treated surface with your hand. Now the
hardness of the coating corresponds to H1. (The hardness of the car paint
coating is Н1-Н2).
After 3 weeks, the coating will completely harden. (The hardness of the coating will correspond to H6 - very hard). For a perfect result, we recommend treating the car surface with AQuly every 3-6 months.
Attention!
For 3 weeks after applying
AQuly, refrain from using detergents with hard brushes. After 3 weeks, the car
can only be washed with water, no shampoo! It is recommended to treat the
surface of the car with AQuly conditioner to maintain the excellent gloss and
water repellency of the surface of your car. We do not recommend applying AQuly
to your windshield.
Related Products
Tags: Aquly, car coating, car body protection
