GTECHNIQ Crystal Serum Light, 1,7 fl oz (50ml)
Swirl and
chemical resistance, Incredible gloss, Up to 5 years of durability
- Manufacturer:
- Product id:G150001007
- Available:10 pcs.
- Weight:0.50 kg
- Dimensions (L х W х H):5.60 x 5.60 x 10.90 cm
Brand: GTECHNIQ, USA
Shipping weight: 1 pound
Product Dimensions (L x W
x H): 2.2 x 2.2 x 4.3 Inches
Product Description
Why Use Gtechniq
Crystal Serum Light?
Crystal Serum Light is the
prosumer version of the world-famous Gtechniq Accredited Detailer Crystal Serum
Ultra. It offers 80% of professional Serum Ultra’s performance, but if applied
incorrectly can be machine polished from your vehicles paintwork.
When it comes to adding
gloss, resisting swirls, contaminant and dirt repellency, Gtechniq Crystal Serum
Ultra and Serum Light are the pinnacle in paint protection.
Application
Information
Simple Steps To Help
You Get The Best Results
- To apply Crystal Serum Light (CSL) make sure your
vehicle is indoors and can stay indoors for 12 hours after application, do
not apply in direct sunlight
- Only apply the product at a temperature between 41F°
(5°c) and 77F° (25°c)
- Shake
well and wear gloves
- Wash and decontaminate your paintwork thoroughly
prior to application. If required, polish your paintwork, either by
machine or hand, to remove any imperfections
- Spray Panel Wipe into a Gtechniq MF1
Microfibre Cloth and wipe down each panel in small sections
- Soak the application pad with 3 full measures of
CSL from the pipette and work the liquid into the pad to get an even saturation
- Replace the lid on the bottle and set aside – do
not keep the bottle in your hand as this promotes premature curing
- Apply in overlapping strokes to an area roughly
2ft by 2ft, or work to the bodylines of the vehicle
- Immediately remove residue with an MF1 cloth –
you may need to buff the same area several times, but avoid doing it with
too much force. We recommend the use of 2 cloths at any one time. Make
sure the cloths are rotated during residue removal to prevent CSL curing
in the cloth- this can make buffing residue difficult
- Inspect the surface for residue with a bright,
diffused light source
- If you remove residue and it cures fully you
should polish the area and reapply CSL
- As soon as you finish, put you MF1 cloths in
water, wash and dry them as soon as possible
- Wait approximately 2 hours after applying CSL to
apply EXO Ultra Durable Hydrophobic Coating, or C2 Liquid
Crystal
- Store in a cool, dry place
- Use
within 3 months of opening
CAUTION: EYE
IRRITANT. In case of eye contact, flush thoroughly with water for 15 minutes.
KEEP OUT OF REACH OF CHILDREN. Keep from freezing.
Notice
We aim to show you
accurate product information. Product packaging and material may contain more
and/or different information from the website, including the product
description, country of origin, nutrition, ingredient, allergen and other
information. Always read labels, warnings, and directions and other information
provided with the product before using or consuming a product.
I Am Looking To
Protect My New Car - What Products Shall I Use?
See the table below for a
breakdown of characteristics of each of our paint protection products. Key to long-term gloss retention is swirl
resistance – the main cause of degradation in gloss is the build up of micro
scratches made when your car gets washed.
As you will see from the
table for the swirl resistant products, C1 and Crystal Serum Light and Crystal
Serum Ultra, we also recommend an over coating of either C2 or EXO. The reason
for this is that these coatings offer much better water and dirt repellency, as
well as surface slickness. The combination of not having to wash your car so
often or so aggressively, and the swirl resistance of the C1 or Serum, offers
unparalleled surface protection.
Tags: G150001007,